SALUS NanoPaint
- Extreme Protection Epoxy
Self-priming two-coat with superior impact, corrosion and chemical resistance.
Salus NanoPaint for ship hulls and superstructures is a revolutionary two-part, self priming Nanotechnology enhanced amine Epoxy, designed for long service in extreme atmospheres. Principally used for immersion service including fuel storage, chemical containment and wastewater treatment. The tightly cross-linked epoxy integrates with the surfaces to provide a protective shield with superior corrosion chemical and abrasion resistance with low VOC.
Salus NanoPaint passed the Abrasion ASTM D 4060, Adhesion ASTM D 4541 (1735 psi), Cathodic Disbondment ASTM G 8, Chemical Immersion NACE TM-01-74, Immersion (high temp.) ASTM D 870, Salt Spray(FOG) ASTM B 117 (1000 hr.), Steam Pressure. Salus NanoPaint is fast curing, does not off gas VOCs or leach components into the water.
COLORS: Beige, Gray, Black and White. Special colors available.
DIRECTIONS:
SURFACE PREPARATION:
Steel: Immersion Service: SSPC-SP10/NACE 2 near white blast cleaning obtaining a minimum angular anchor profile of 2.0 mils (50 microns)
Fiberglass: Scarify/sand gelcoat. Clean with Nano BioClean, rinse, dry before painting.
All Surfaces: Must be clean, dry and free of oil, grease and other contaminants.
APPLICATION:
COVERAGE RATES: For JP-4, JP-5, JP-8, Aviation Gas, Jet A-1 Service
Allow for overspray and surface irregularities. Film thickness is rounded to the nearest 0.5mil or 5 microns. Application of coating below minimum or above maximum recommended dry film thicknesses may adversely affect coating performance.
EXTREME ENVIRONMENTS WHERE SALUS NANOPAINT LIVES:
IMAGE 1:
Product
IMAGE 2:
Technical Data Sheet - NanoMarine Paint pdf